Landships II

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Autofrettage in WW1 French artillery


Legend

Status: Offline
Posts: 1803
Date:
Autofrettage in WW1 French artillery
Permalink   


 

I saw a reference to the barrel of the 220mm L Mle 1917 Schneider gun being treated with autofrettage in GBM and wondered how many other

WW1 artillery pieces had their barrels made from steel tube which had been autofrettaged - anyone know?

For the uninitiated autofrettage is a process where a steel tube is filled with hydraulic fluid and the pressure of the fluid is increased until the

inner part of the tube exceeds the elastic limit of the steel but the outer part does not. The effect is to create a zone in the steel where there

is a permanent inward directed stress in the steel. The resists cracking and makes the steel capable of handling higher internal pressures 

than untreated steel. For a gun barrel an autofrettaged barrel can be much lighter and thinner than an untreated barrel.

As an example a 240mm Mle 1903 coastal defence gun had an L/26 barrel which weighed 14.6 tons and a range of about 12.5km - this had to be an untreated barrel because the

process was invented by the French engineer Jacob in 1907. The 220mm Schneider gun had an L/35 autofrettaged barrel which weighed 9.3 tons and had a range of 22.5 km.  

Regards,

Charlie

 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard