Landships II

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: WWI Model Railway
Rob


Legend

Status: Offline
Posts: 1329
Date:
WWI Model Railway
Permalink   


Had an idea going around in my head for a while of a model narrow gauge War Department Light Railway in 1/76 scale. I miss the fact that with model trains they actually do something instead of just sitting there looking pretty and getting dusty like model figures, tanks etc. So i've had the idea for a small (about a metre long) narrow gauge railway, which would also include figures, vehicles etc along the way. It would consist of;

Railway rolling stock

Simplex 'armoured' or 'protected' 40hp petrol locomotive (the kit i'm buying has options for both and not sure which one to choose)

WDLR wagons - a company called Parkside Dundas does these, such as a well wagon (a wagon with a dip in the middle), a dropside wagon and a goods/ambulance wagon

Military vehicle kits

Reviresco Thornycroft J type
Reviresco Rolls Royce Armoured Car
Emhar Whippet Medium Tank
Emhar Mk IV 'Male' Heavy Tank

As well as this i'd have modified plastic figures if non were of any use, as well as metal/resin figures that I could find. It would be set in 1918, with the railway going from a supply depot at the rear line to a drop off point near the front where vehicles, men and artillery are preparing for a push forward. Although with it only being a metre, to be scale it would only be 76 metres long, but using a bridge or something else to divide it it will be made to seem like two different railways, plus because the locomotives and rolling stock are so small, as is the track (at least compared to the Hornby stuff I used to use) that will help too. Has anyone else done anything similar to this before? Seen a couple of guys on a model railway messageboard that have done it before


__________________

http://www.flickr.com/photos/roblangham



Field Marshal

Status: Offline
Posts: 456
Date:
Permalink   

This is something I would REALLY love to seen done!

Railways were as we all know THE most strategically important mode of transportation of the whole war. They determined much of the outcome, the shape of the frontlines certainly - in the west, the front stalemated pretty much along a pattern set by the railways - and it was the lay of railways that pretty much determined the outcome of the offensives - more than the guns, certainly more than the tanks.

I have never found any site dedicated to the Military use of railways, besides railway guns that is. Any suggestions?

__________________
/Peter Kempf
Rob


Legend

Status: Offline
Posts: 1329
Date:
Permalink   

The only one I have found is this website about the War Department Light Railway (British)

http://www.wdlr.org.uk/

and also this about the 'protected' Simplex 40hp tractor

http://www.bagofbits.com/tinturtle/

__________________

http://www.flickr.com/photos/roblangham



Colonel

Status: Offline
Posts: 233
Date:
Permalink   

Rob ,
please have a look at e-Bay for ROCO Feldbahnen (trenchrailway? ) gauge HOm = meter gauge.

As i can rember they were in cataloge a long time even before Roco was going insolvent.

It grewed up new meanwhile but with a small program .

__________________
Steel can be helpful - you have only to bring it into the "right form "


Captain

Status: Offline
Posts: 90
Date:
Permalink   

Hello Rob, hello Lafettenheini

I'm working on this subject, too.
Roco produced some very nice rolling stock and locos in HOe. HOe is narrow gauge to HO.

You have to pay attention: continental HO (and HOe) is in 1/87 scale. Unfortunately the locomotives and the rolling stock look too small in combination with the 1/76 scale models I think.

Regards
Thomas



__________________


Colonel

Status: Offline
Posts: 233
Date:
Permalink   

Hello Thomas ,hello Rob

Thank's for your attention. Latenightwriting made me forget this point .
When you take the railway material and the mechanical source of the locomotives and waggonsyou can sratchbuild nearly every sort of rolling material. The difference of scales
in fact of the gauge is not too great in my opinion. With brass-tin plates and brasswire in use
with a good welding aquipment .....

Best regards
Gerd

__________________
Steel can be helpful - you have only to bring it into the "right form "
Rob


Legend

Status: Offline
Posts: 1329
Date:
Permalink   

Well, got the Simplex a couple of days back, looks very complicated but a very nice detailed kit. Got a couple of wagons for it coming in the post too, can't wait to get this one started

__________________

http://www.flickr.com/photos/roblangham

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard