It would be neat if someone made a kit of the worlds first tracked armored vehicle. All my books point to it being one particular vehicle...
A Killen-Strait tractor fitted with a sawed up Delaunay-Bellville front. Weird looking thing. But then, I was flipping through my little russian book, and I found a drawing of SOME kind of armored car fitted to a killen-strait. So I don't know. But it's quite interesting.
Yes the Killen-Strait armored tractor developed by Richard Hornsby & Sons is very interesting. But more so is a bit of information I have in an odd little Russian book (type written with a very poor binding looking sort of amateurish) called The Dawn of Armor: 1901-1921" by Georgii Narochnitskaya which covers lots of strange vehicles like the Fowler land locomotive. The book has very few photos (nothing new that is not of very bad quality) and a few decent drawings. I started to pay to have it translated a few years ago but ran out of money so I cant give a lot of details.
Basically, it has a chapter of written memoirs by a Russian Colonel that are mixed with summaries/comments by the author (because of they share the same the officer seems to be an ancestor of the author) who was charged with getting four unarmored Killen-Strait tractors ready for combat starting in early 1917. The author affirms the tractors did have a turrets taken from Lancasters armored cars changed to use captured Schwarzlose M7/12 MGs but apparently the armor itself was shipped to his unit based slightly to the North of Riga from the Pulitov Works. One unit was left with an open top and arrangements were made to equip it with a Rosenberg m/15 but for some reason it was instead changed to use the 37mm Infanteriegeschtz M.15. It seems that while two units had seen action a couple of weeks prior to Russia withdrawing from the war the cannon equipped unit had mechanical problems and parts shortages that prevented it from being used during the First World War while one of MG equipped units broke down to often to see combat till the civil war.
The author further reports that two of the MG equipped Killen-Strait armored tractors were captured by the Germans at the end of hostilities but only one was in working order. Apparently, conflicting reports exist as to what the Germans did with them as some of the authors sources indicate it was used on Western front and destroyed while others say that it was never used in combat. Apparently, the second unit the Germans had was repaired but stayed in Russia and somehow wound up in the Hands of the Finns although no knows what happened to it. Apparently, the last MG equipped and one mounting the cannon were used by the Soviets during the civil war in the Ukraine but no seems to know what happened to them.
If anyone wants more info from the book Ill see what I can find out.
I find your posting very interesting, I have been working on a book for many years on the Russian Broynetracktors { },Military tractors of WW1/Civil War. I have read a lot of information, and have had a lot translated, But I have never herd of the Russians armouring Killen-Straits,Thats Cool., I would be very interested in getting more information, if possiable, like some copys, of that book, of course I am willing to pay for what ever it may cost, or if you can scan them, and email them it would be greatemail address is as follows ww1nut1918@yahoo.com .
Thanks for the reply. After reading the thread I recalled my involvement with the book and some of what it said on the topic.
I picked up the book about ten years ago and I’ve not had a lot of luck finding out much about the author although I may be able to reach the daughter of the author via a friend in Latvia. Judging from the look of the book I’d say the publishing job was very amateurish and I wonder if it was simply run off by some cut rate vanity press. The book was apparently made in the ‘50s and not in the greatest of shape but fully readable. It lacked an ISBN or copyright statement so half wonder if it was “properly published” rather then just a manuscript.
According the translator I hired the book concentrated mostly upon the personalities of the designers (which has no interest to me) and accounts of vehicle crews in battle without much attention to technical matters (which is what I care about most) so I can’t say it’s a good resource in a lot of ways.
The first chapter apparently dealt with a bit of background on “road locomotives” and the motor industry from the turn of the century based on the photos and drawings which were nothing special. The second chapter was some contemporary accounts about the Fowlers use in the Boer war. After that was lots of talk about the pre-war Mineras and various french makes of armored cars that I never had translated but hoped to have done so one day. A chapter about Burstyn was next followed a lengthy chapter on the British Mk.I , an American rhomboid tank I never heard of (the photos of that tank were the best in the book) and the A7V-U. A chapter of war stories about Czechs and Finns using armored vehicles in Russia and Finland and looked overly sensationalistic. The rest of the book covered the Killen-Straits, a Russian half-track, the Vezdekhod (I can’t remember which one), the LK II & III and some obscure German light tank prototypes from 1918.
I had around 20 pages translated from various parts of the latter chapters dealing with Killen-Straits and other strange AFVs. Unfortunately, my translator moved away and everyone else I talked to wanted too much to translate it so it just gathered dust for a couple of years.
I sold recently to an armor enthusiast who plans to translate and republish it.
If you want more info I’ll dig up the translations and see if I can answer them.
" an American rhomboid tank I never heard of (the photos of that tank were the best in the book)"
Was this the US Engineer Corps Steam Tank, the Skeleton Tank, or the Studebaker Tank?
Aso, this Killen-Strait thing is incredible! I had no idea of all this information! It seems like these Killen-Strait AFVs need their own little chapter in WWI armor history!
And, when will the translation and republication come available? I would love to pick up a copy of this book!!!
I am so amazed to have found this site! Until a couple of days ago I had no idea so many people care about the this stuff. The odd thing is that it seems everyone but me is a modeler rather then a mechanical type so I guess Im the odd man out.
Basically, Im into this stuff as I had a family member that served and died with the Freikorps so Ive got a bit of person interest. Beyond that, a friend of mine is very into restoring old locomotives but for a couple of years his chief interest has been in building a running replica of both the Kraftprotze and the Hessen-Cassel. He is well along on both projects as a result of getting partial blueprints.
I am not familiar with any of the tanks mention regarding the American rhomboid. The one in the book had a bunch tubing like framework shown in one picture with two more of the inside and one of the drive train. The photos were all from some sort of trial grounds during the war. In any case, the odd American tank is the second one shown in the post before this one.
As to the Russian Killen-Strait stuff I was very excited until the translations were done. Basically, what I wanted was detailed descriptions of the mechanical layout, performance data and armor data so I could figure out how to model (in math terms) the effectiveness of the design. Unfortunately, the story of the men who fought in them is what the book focuses on ans gives almost no coverage to what I wanted.
In any case, if anyone is interested the story of the tractors Ill do my best to answer any questions. Also, I should be hearing from my friend in Riga about his meeting with the daughter of the author.
Obscurata... I believe the pictures of the Skeleton Tank, as the tube-work tank was called, are extremely rare.
If you could obtain high quality scans of the pages involving this tank, I would be extremely greatful.
Im the resident fan and researcher of this tank. It was built to get the best of both worlds from the heavy rhomboids, and the little FT-17s. It weighed only 9 tons, had 1/2 inch armor overall, and a quite fast top speed of around 12 mph. 1000 were ordered, but the armistice was signed before a single production copy was completed. The sole suvivor is the original prototype, recently restored at the Aberdeen Proving Grounds.
I would be happy to send you a very interesting PDF of an Armor Magazine article devoted to this tank.
And please, this was one of the most interesting AFVs of WWI, and in my oppinion, it would have been one of the best tanks of the war. Plus, there is a great little conspiracy theory to go along with it. I would absolutely love it if you could obtain copies of the pages relating to this tank.
I don't what this scan thing is people have mentioned here so your alright.
The Kraftprotze was a Krupp infantry tank design from 1918 featuring a fully revolving turret equipped with a single MG and mechanical layout was similar to the LK III . A single prototype was constructed by armistice but never delivered to the front. Once it entered production power was to come from a 75 horse power straight 6 engine built under license from Motorwerke Berna AG of Olten rather then the Daimler Benz auto engine employed in the prototype although provisions were also made to use the Daimler Benz D I (a readily available and obsolete 100 HP straight 6 aero engine). Alternate armament proposed included: 2 cm Flugzeug-Maschinen Kanone Type 2-10145, 13mm Tank Gewehr and the 13mm TuF Maschinengewehr.
Hessen-Cassel: This was a Wegmann Waggonfabrik tank design from 1918 that never made it to a fully operational prototype and was, in this respect, like the Hanover tank designed by Louis Ehlers. Proposed engines included the Daimler Benz DII aero engine and the Argus AS 3 aircraft motor as was the case with the Oberschlesien. Design variants called for the drive sprocket in both the center and rear. Proposed armament was either the 3.7cm TAK Rheinmetall in starrer Räderlafett or the 2 cm Flugzeug-Maschinen Kanone Type 2-10145 along with or substitued by one or two MGs. Apparently several different variants existed for this design although I assume that they are merely iterations intended to compensate for parts shortages.
Well I don't own them but a friend of mine does. Like most blueprints they a pretty big so can't see how they would fit here. If you like i'll send you his email address and you can talk to him about his construction projects as he's a great machinist. His English is a rough (even worse then mine) so keep that in mind.